- Atlas
- Black Rubber Tyre Plastic Centre
- Black Rubber Tyre Steel Centre Wheel With Roller Bearing
- Grey Rubber Tyre Plastic Centre Wheel With Plain Bore
- High Temperature Phenolic Resin Wheel With Plain Bore
- Nylon Faced Safe Blow Hammers
- Nylon Wheel With Plain Bore
- Polyurethane Tyre Nylon Centre Wheel With Plain Bore
- View All
- Atlas Workholders
- Avon
- Cotswold
- Aluminium Mop Bucket
- Mop Handles
- Ribbed Nylon Door Mats
- Coir Fibre Door Mats
- Hand And Skin Care
- Hand Wire Brushes
- Kentucky Mop Bucket
- Kentucky Mop Heads
- Long Handled Plastic Dustpan And Brush Set
- Paper Hanging Brush
- Replacement Squeegee Blade
- Stainless Steel Squeegees
- Sweeping Mops
- Synthetic Mop Heads
- Tar Brushes
- View All
- Cromwell
- 'Tri Square' 90Deg Shell Mills
- 1/4" Hex Bits
- 1/4" Hexagon Drive Cup Hook Driver Bit
- 1/4" Square Drive Slipper Wrenches
- 1000V Dual Grip VDE Screwdrivers
- 107 Piece Apprentice Engineer's Tool Kit
- 10mm AF Hexagon Drive Screwdriver Bits
- 10mm Hex Drive Bits
- 10mm Hexagon Power Bit Set
- 12-in-1 Reversible Ratchet Spanners
- 20 In 1 Cycle Multi Tool And Pouch
- 22mm SDS-Plus Impact Drill
- 23 Piece Builder's Construction Tool Kit
- 3 Tray Tool Trolley
- 3-in-1 Mini Bender
- 4 Drawer Service Cart
- 4-In-1 Reversible Ratchet Spanners
- 45Deg Snipe Nose Pliers with Cutter
- 5/16" Hex Bits
- 6 Wheel Number Punch
- 60 Series Couplings
- 61 Piece Home Handyman Tool Kit
- 75 Piece Set With Professional Roller Cabinet - TCC075
- Accessories
- Accessories Socket Sets - 3/8" Square Drive
- Adaptors / Converters
- Adjustable 'C' Hook Spanners
- Adjustable Flat Bits
- Adjustable Hacksaw
- Adjustable Pipe Wrenches
- Air Drain Test Kit
- Air Tool Chisels with 0.401" Shank
- Aluminium Pipe Wrench
- Aluminium Reinforced Case
- Aluminium Rivets
- Aluminium-Bronze Spark-Resistant Safety Tool 1/2" Square Drive Swivel Handle
- Aluminium-Bronze Spark-Resistant Safety Tool Adjustable Combination Pliers
- Aluminium-Bronze Spark-Resistant Safety Tool Adjustable Wrenches
- Aluminium-Bronze Spark-Resistant Safety Tool Ball Pein Hammers
- Aluminium-Bronze Spark-Resistant Safety Tool Chisel Cross
- Aluminium-Bronze Spark-Resistant Safety Tool Combination Spanners
- Aluminium-Bronze Spark-Resistant Safety Tool Diagonal Cutting Nippes
- Aluminium-Bronze Spark-Resistant Safety Tool Drift Punch
- Aluminium-Bronze Spark-Resistant Safety Tool Flat Cold Chisels
- Aluminium-Bronze Spark-Resistant Safety Tool Groove Joint Pliers
- Aluminium-Bronze Spark-Resistant Safety Tool Impact Sockets
- Aluminium-Bronze Spark-Resistant Safety Tool Linesman's Pliers
- Aluminium-Bronze Spark-Resistant Safety Tool Long Nose Plier
- Aluminium-Bronze Spark-Resistant Safety Tool Pipe Wreches
- Aluminium-Bronze Spark-Resistant Safety Tool Putty Knife
- Aluminium-Bronze Spark-Resistant Safety Tool Ratchet Handle
- Aluminium-Bronze Spark-Resistant Safety Tool Ring End Slogging Wrench
- Aluminium-Bronze Spark-Resistant Safety Tool Safety Extensions
- Aluminium-Bronze Spark-Resistant Safety Tool Scraper
- Aluminium-Bronze Spark-Resistant Safety Tool Screwdrivers
- Aluminium-Bronze Spark-Resistant Safety Tool Single Open End Spanners
- Aluminium-Bronze Spark-Resistant Safety Tool Sledge Hammers
- Aluminium-Bronze Spark-Resistant Safety Tool Sliding T-Handles
- Aluminium-Bronze Spark-Resistant Safety Tool Socket Set 1/2" Square Drive
- Aluminium-Bronze Spark-Resistant Safety Tool Socket Set 3/4" Square Drive
- Aluminium-Bronze Spark-Resistant Safety Tool Sockets
- Aluminium-Bronze Spark-Resistant Safety Tool Speed Brace 1/2" Square Drive
- Aluminium-Bronze Spark-Resistant Safety Tool Square Shovel
- Aluminium-Bronze Spark-Resistant Safety Tool Universal Joint 1/2" Square Drive
- Aluminium-Bronze Spark-Resistant Safety Tool Wedges
- Aluminium-Bronze Spark-Resistant Safety Tool Wrecking Bar
- Angle Plates
- Anti-Slip Floor Paint
- Assorted Drill Set
- Auger Bits
- Autoload And Lock Knives
- Automatic Pipe Cutters
- Axial Grip Wrenches
- BA (British Association) HSS Ground Thread Taps
- Ball Driver L-Wrench
- Bar Magnets
- Barn Type Holdalls
- Barn Type Tool Boxes
- Beechwood Folding Rules
- Beechwood Sawing Blocks
- Bench Hook
- Bench-Pillar Drills
- Bevel Edge Wood Chisels
- Bi-Hexagon Deep Sockets
- Bi-Hexagon Sockets
- Bi-Hexagon Sockets - Standard
- Bi-Hexagon Standard Length Sockets
- Bi-Hexagon Standard Sockets
- Bottle Jacks
- Box Spanners
- Brass Fastener Assortment
- Brazed Tip Cranked Turning And Facing Tools
- Brazed Tip Turning And Boring Tools
- BSF (British Standard Fine) HSS Ground Thread Taps
- BSPF (British Standard Pipe Fine) HSS Ground Thread Die Nuts
- Butt-Welded Tools
- Button Magnets
- C-Hook Spanners
- C3 Hand Scraper Set
- Cabinet And Chest Spares
- Cabinet Scraper Set
- Cabinet Screwdrivers
- Cable Cutters
- Canvas Holdall
- Carbide Plain Shank Slot Drills 2 Flute
- Carbide Plain Shank Slot Drills 2 Flute Ball Nosed
- Carpenter's Pincers
- CC01 - U-Clamp
- CC02 - Bore Clamp
- CC04 - Tapped End U-Clamp
- CC05 - Plain Clamp
- CC06 - Tapped End Plain Clamp
- CC07 - Slotted End Clamp
- CC08 - Swing Clamp
- CC11 - Free Vice Jaw
- CC12 - Adjustable Clamp
- CC13 - Adjustable Stepped Clamp
- CC19 - Forged Swivel Clamp
- CC20 - Forged Swivel Clamp
- CC21 - Swivel Rack Clamp
- CC24 - Eccentric Cam Lock
- CC25 - Step Clamp
- CCO3 - Swan Necked Clamp
- Chain Pipe Wrenches
- Chain Separators
- Chalk Line Refills - Large
- Chisel Tool Roll
- Chrome Molybdenum Impact Sockets
- Chrome Molybdenum Impact Sockets And Accesories
- Chrome Vanadium Plier And Wrench Sets
- Chuck Adaptors
- Chuck Keys
- Circlip Pliers
- Circlips
- Cleaning Baths
- Clutch Type Drive Push Through Steel Handles
- Cold Chisels
- Combination Pliers
- Combination Pouches
- Combination Spanners
- Combination Squares
- Combination Top Clamp And Pinlock External Toolholder
- Complete Tool Control Sets Include Kennedy Professional Roller Cabinet
- Composite Ratchet Handle
- Compound Action Aviation Snips
- Contractor Cold Chisels
- Contractor Packs
- Coupling Adaptors
- Cranked Blade Heavy Duty Snips
- Crowfoot Wrenches
- CV Ball Drivers
- CV Hex Keys
- Cylinder Hone Set
- D3 Hand Deburring Set
- Data Books
- Deep Pot Magnets
- Desoutter Shank Bits
- Diagonal Cutting Nippers
- Dial Indicating Torque Drivers
- Dial Indicating Torque Wrenches
- Diamond Coated Burrs
- Diamond Needle File Sets
- Die Springs
- Digital Multimeter
- Direct Drive Adaptors for Power Tools
- Direct Drive Bits for Power Tools
- Direct Feed System
- Disc Type Steel Handle
- Divider To Suit Storage Cabinets
- Double Ended 1/4" Hex Bits
- Double Ended Lug
- Double Ended Ring Spanners
- Double Lug
- Drain Rod Sets
- Drain Rods
- Drain Test Bungs
- Drain Testing Dye
- Drawer To Suit Storage Cabinets
- Drill Chuck
- Drive Converters
- Drop Head Threader
- Dust Sheet - Cotton Twill
- E-Torx Ring Spanners
- E-TX S Sockets
- Easy Read Dial Gauges Plunger Type
- Easy Read Dial Test Indicators
- Electrician's Screwdrivers
- Electrician's VDE Square Section Handle Screwdrivers
- Electronics Pliers And Cutters
- Electronics Shear
- Enamel Paint
- Engineer's And Electrician's Screwdrivers
- Engineer's Pliers - Slip Joint
- Engineer's Screwdriver Bit Set
- ER - Collet Chucks
- ER - Collet Set
- ER - Single Angle Collets
- ER Industrial Hook Wrench
- Extension Bars
- Extension Cables for Site Use
- Extensions
- Extra Deep Tool Chest
- Extra Heavy Duty Roller Cabinet
- Extra Heavy Duty Tool Chest
- Extra Large Tool Chests And Roller Cabinets
- Extra Large, Extra Heavy Duty Roller Cabinet
- Extra Large, Heavy Duty Tool Chest
- Extra Long Ball Driver Hex Key Set
- Extractable Dowels
- Fastener Assortments
- FC02 - Seratted Ball End
- FC04 - Flanged Nut
- FC05 - Extension Nut
- FC06 - T-Slot Nut (Milled)
- FC07 - Engineers Stud
- FC08 - T-Slot Nut (Ground)
- FC09 - Swing Bolt
- FC16 - Swivel Clamping Screw
- FC17 - Swivel Shoulder Clamping Screw
- FC18 - Grip Point Screw
- FC21 - Round Grip Pad
- FC22 - Spacer
- FC23 - 'C' Washer
- FC25 - Spherical Washer Set
- FC29 - Swivel Foot
- FC40 - T-Slot Bolt
- Female/Male Converters
- Ferrite Shallow Pot Magnets
- Fibre Discs
- Fibre Optic Kevlar Shears
- File Belts
- Fix-It Kits
- Fixed Head Torque Wrenches
- Fixed Length Torque Wrench
- Flag Type TX Keys
- Flap Wheel Sets
- Flat Bit Set
- Flat Bits
- Flat Nose Pliers
- Flex-Head Ratchet Combination Spanner Set with Adaptors
- Flexi-Ring End Sockets
- Flexible Hoses
- Flexible Rubber Collet Sets
- Floor Paint
- FM - Face Mill Adaptors
- Forster Bits
- Fount Set
- General Purpose Tinsnips
- Genuine Schrader Couplings
- Grip Wrenches
- Groove Joint Waterpump Pliers
- Hand Stamps
- Heavy Duty Aluminium Case
- Heavy Duty Aluminium Tool Case
- Heavy Duty Deep Throat Clamps
- Heavy Duty Diagonal Cutting Nippers
- Heavy Duty Lever Action Riveter
- Heavy Duty Linesman's Pliers
- Heavy Duty Magnetic Driver
- Heavy Duty Pipe Cutters
- Heavy Duty PVC Nylon Coated Canvas Holdalls
- Heavy Duty Site Tool Boxes
- Heavy Duty Snap Ring Pliers
- Heavy Duty Snipe Nose Pliers with Cutter
- Heavy Duty T-Handle Multi-Hold Clamps
- Heavy Duty Tool Bag
- Heavy Duty Tool Boxes
- Heavy Duty Wire Strippers
- Heavy Duty Wrenches
- Heavy-Duty Nylon Air Hose
- Hex Bit Adaptor
- Hex Driver Impact Sockets 3/8" Sq. Dr.
- Hexagon Ball Driver Hand Clip Sets
- Hexagon Key L-Wrenches
- Hexagon Key L-Wrenches - Long Arm
- Hexagon Key Walleted Sets
- Hexagon T-Handle Ball Drivers
- Hexagon T-Handle Wrenches
- HHS-E (5% Co) Countersinks Single Hole
- Hi-Grip Pound Thru Scredrivers
- Hi-Grip Screwdrivers
- High Impact Resistant Tool Case
- High Speed Steel SCD Drills
- High Tensile Bolt Cutters
- High Tensile Diagonal Cutting Pliers
- Holdall with Shoulder Strap
- Holesaw Arbors
- Horizontal And Vertical Index Unit Chucks
- Horizontal Industrial Toggle Clamp
- HSS Diehead Chasers
- HSS Ground Flute Jobber Drill Sets
- HSS Straight Shank Long Series Drills
- HSS Threaded Shank Woodruff Cutters
- HSS Tin Tipped Centre Drills
- HSS TiN Tipped Jobber Drill Sets
- HSS-Co. 5% Threaded Shank Slot Drills 2 Flute
- HSS-Co. 8% Plain Shank Milling Cutter 4 Flute
- HSS-Co. 8% Straight Shank Heavy Duty Drill Set
- HSS-Co. 8% Threaded Shank Ball Nosed Slot Drills 2 Flute
- HSS-Co. 8% Threaded Shank Slot Drills 2 Flute
- HSS-Co. Straight Shank Drills
- Hydraulic Grease Nipple Kit
- Hydraulic Grease Nipples
- Hydraulic Pull Back Ram
- Hydraulic Separator Sets
- Ignition Wrench Kit
- Impact 3/8" Sq. Dr. Extractor Sockets
- Impact Driver Sets
- Impact Hexagon Bit Driver 1/2" Sq. Dr.
- Impact Resistant Plastic Case
- Impact Resistant Service Case
- Impact Socket Sets
- Impact TX Bit Driver Sockets 1/2" Sq. Dr.
- Impact TX Sockets 1/2" Sq. Dr.
- Impact Wheel Nut Sockets 1/2" Sq. Dr.
- Indexa T-Slot Clamping Kits
- Indexa T-Slot Clamping Kits
- Industrial Cantilever Tool Boxes
- Industrial Combination Spanners
- Industrial Flared Nut Ring Spanners
- Industrial Key Steel
- Industrial Lazy Tong Riveter
- Industrial Offset Combination Spanners
- Industrial Open Ended Spanners
- Industrial PVC Airline Hose
- Jeweller's And Watchmaker's Tool Sets Carbon Steel And Alloy Steel Blades
- Jeweller's Snips
- Jumbo Sponge
- Jumbo Tool Bag
- Kennedy Precision Blades
- Key Ring Sets
- Leather Belts - Heavy Duty
- Letter And Number Stamps
- Lever Lock Boring Bars
- Lever Lock External Toolholders
- Lever Reversible Rubber Handle
- Lever Reversible Steel Handle
- Lever Reversible Steel Handle Flexi-Joint
- Lever Type Cable Cutter
- Lever Type Steel Handle
- Lightweight Bag And Case
- Lightweight Sash Clamps
- Locking C-Clamps
- Locking C-Clamps - Swivel Pads
- Locking Tape Measures
- Long Arm Riveter
- Long Nose Pliers
- Long Screwdriver Bit Sockets And Socket Bit Sets
- Low Tensile Bolt Cutters - Centre Cut
- Magnetic Cable Guider
- Magnetic Hold Fasts
- Magnetic Screwdriver Bit Holder
- Magnetic Stand Fitments
- Magnetic Tool Tray
- Maintenance Sprays and Lubbricants
- Maintenance Sprays And Lubricants
- Male Threaded Tailpieces
- Markers - Line and Paint
- Masonry Saws
- Master Screwdriver Bit Set
- Mechanic's Screwdriver Bit Set
- Mechanic's Screwdrivers
- Medium Tensile Bolt Cutters
- Medium Weight Holdalls
- Metal Oil Cans
- Meteor Hand Saw
- Meter Box Key
- Metric / Inch Hexagon Key Set - 20 Piece
- Metric B-Type Toolholder And Threading Kit
- Metric Threading Set
- Micro Die Grinder
- Midget Pipe Cutter
- Mini Bolt Cutters
- Mini ISO Magnetic Cylinders
- Mini Pipe Cutter
- Mini Screwdrivers
- Miniature Open Ended Spanners
- Miniature Pliers
- Moulded Plastic Creeper Board
- Multi Purpose Power Tool
- Multi Tool Roll
- Multi-Pro Spot Drills And Chamfer Mills
- Multibender Pipe Bender
- Needle File Sets
- Non-Reversible Rubber Grip Quick Release
- Non-Woven Roll
- Nut Spinners
- Offset Double-Ended Screwdrivers
- Offset Fixed Handle
- Open Ended Spanners
- Open Jaw Slogging Spanners
- Open Jaw Spanners
- P.T.F.E. Tape
- Pad Saw
- Palette Knives
- Pilot Drills
- Pipe Cutters
- Pipe Deburrer
- Pipe Unblocker
- Pipe Vice
- Pipe Wrench
- Plasterboard Saw
- Plastic Blow Gun
- Plastic Bucket
- Plastic Pipe Cutters
- Plastic Pipe Gripping Pliers
- Polyester And Nylon Belts
- Polypropylene Moulded Tool Case
- Portable Tool Chest
- Power Magnets
- Power Punch Kit
- Pozidriv Woodscrews
- Precision Jeweller's Screwdriver Sets
- Precision Screwdrivers
- Pressure Testing Pump - 860psi
- Pro-Torq Combination Pliers with Side Cutters
- Pro-Torq Diagonal Cutting Pliers
- Pro-Torq End Cutting Nippers
- Pro-Torq Hex Wrench Sets on Clip
- Pro-Torq Hexagon Ball Wrench Clip Sets
- Pro-Torq Insulated Combination Pliers
- Pro-Torq Insulated Diagonal Cutting Nippers
- Pro-Torq Insulated Snipe Nose Pliers
- Pro-Torq Miniature ESD Pliers And Cutters
- Pro-Torq Miniature Pliers
- Pro-Torq Precision Screwdrivers
- Pro-Torq Screwdrivers
- Pro-Torq Snipe Nose Pliers with Side Cutter
- Pro-Torq Sprung Circlip Pliers
- Pro-Torq T-Handle Hexagon Ball Drivers
- Production Slipper Torque Wrenches
- Professional Combination Spanners
- Professional Flared Nut Ring Spannes
- Professional Flex-Head Ratchet Combination Spanners
- Professional Open Ended Spanners
- Professional Ratchet Combination Spanners
- Professional Reversible Combination Spanners
- Protective Coating
- Pruning Set
- Push Pull Industrial Toggle Clamp
- Push Through Rubber Handle
- Push Through Steel Handles
- Push Through Steel Handles - Gearless
- Push Type Grease Gun
- Push-Fit Pneumatic Fittings
- PVC Coated Rayon Tool Rolls
- Quality Industrial Dowel Pins
- Quick Change Toolposts
- Quick Release Ratchet Handle
- Quick-Set Torque Drivers
- R8 Collets For Bridgeport
- Rafter's Square
- Ratchet Combination Spanner Set with Sockets
- Ratchet Repair Kits
- Ratchet Screwdriver
- Ratchet Type Cable Cutter
- Ratchet Type Tap Wrenches
- Ratcheting Cable Cutter
- Ratcheting Hose Pinch Pliers
- Reduced Shank Wad Punches
- Replacement Jaws (Pairs)
- Replacement Jaws For Bolt Cutters
- Replacement Square Drives
- Replacement Squares for Torque Wrenches
- Replacement Tips - Double Flat
- Replacement Wheel Sets
- Reversible Blade Screwdriver
- Reversible Circlip Pliers
- Reversible Ratchet Podger Spanners
- Reversible Ratchet Ring Wrenches
- Ring Crescent Wrenches
- Ring End Podger Spanners
- Ring Slogging Spanners
- Rivet Nut Inserter
- Rivet Nuts
- Roller Cabinets
- Rust Covering Enamel Paint
- SC01 - Support Spacer
- SC04 - Location Collar
- SC10 - Extension Pillar
- SC11A - Screw Jack
- Screw-On Boring Bars
- Screw-On Boring Bars (Through Coolant)
- Screw-On External Toolholders
- Screwdriver Bit Service Set
- Screwdriver Bit Sets
- Screwdriver Bit Socket Sets
- Screwdriver Bit Sockets
- Screwdriver Bits
- Screwdriver Sets
- Sealant Cartridge Applicator Guns
- SEB - Shoulder Eye Bolt
- Self-Levelling Grip Wrenches
- Service Engineer's Flight Case
- Shallow Pot Magnets
- Shank Adaptors
- Sheet Metal Nibbler
- Short Arm Combination Spanners
- Short Arm Ratchet Combination Spanners
- Sidewinder Drill
- Silicone Sealants
- Single Knurl Toolholder
- Single-Hexagon Standard Length
- Six Knurl Toolholder
- SL - Sidelock Adaptors
- Sliding 'T' Handle
- Sliding Bevels
- Small Parts Storage Cabinets
- Socket And Accessories - Mixed Drive
- Socket Head Button Screws
- Socket Head Cap Screw - Low Head - Metric
- Socket Head Cap Screws - Inch
- Socket Head Cap Screws - Metric
- Socket Head Countersunk Screws
- Socket Head Countersunk Screws - Inch - Self Colour
- Socket Head Flange Button Screws
- Socket Head Shoulder Screws - Metric
- Socket Racks
- Socket Rail Trays
- Socket Rails And Clips
- Socket Set Screws
- Socket Sets - 1/2" Square Drive
- Socket Sets - 1/4" Square Drive
- Socket Sets - 3/4" And 1" Square Drive
- Socket Sets - 3/8" Square Drive
- Soft Touch Engineer's Pliers - Slip Joint
- Soldering Iron
- Solvent Degreasers and Cleaning Bath
- Spare Jaw And Nut For Pipe Wrench
- Spare Spouts to Suit Metal Oil Cans (Interchangeable)
- Spares Aluminium Reinforced Case
- Spares For 4-in-1 Torch Kit
- Spares Heavy Duty Aluminium Case
- Spares Heavy Duty Aluminium Tool Case
- Spares High Impact Resistant Tool Case
- Spares Impact Resistant Plastic Case
- Spares Impact Resistant Service Case
- Spares Service Engineer's Flight Case
- Spark Plug Sockets
- Speed Braces
- Spindle Clamps
- Spinner Handle Fixed Type
- Spinner Handles
- Spiral Ratchet Screwdrivers
- Spline Screwdriver Bit Set
- Spring-Loaded Soft Touch Slip Joint Water Pump Pliers
- Square Drive Reducers And Adaptors
- Stainless Fastener Assortments
- Stainless Fasterner Assortments
- Stainless Steel Pliers And Cutters
- Stainless Steel Roller Cabinet
- Stainless Steel Tool Chest
- Standard Couplings
- Standard Diagonal Cutting Nippers
- Standard Duty Interchangeable Revolving Centre Sets
- Standard Duty Revolving Centres
- Standard Pull Studs
- Steel Back Gent's Saws
- Steel Balls
- Stencil Sets
- Step Clamp
- Step-up Units
- Straight Jaw Bi-Material Handle Grip Wrenches
- Stud Extractor
- SU25 - Step Block
- Suction Feed Spray Guns
- Supra-Rapid Clamping Industrial Keyless Drill Chuck
- Surface Forming Tools
- Surface Preparation And Finishing Discs
- Swedish Pattern Pipe Wrenches
- Swivel Handle
- Swivel Socket Wrenches
- T-Type Wrenches
- Tailpieces And Threaded Connectors
- Tapping Chuck - Tension And Compression Type
- Tapping Chucks - Rigid Type (No Compression)
- Tapping Collets
- Tapping Head Sets
- Threading Inserts
- Threading Toolholders - Dual Top Clamp And Screw-On
- Tie Cord Bonnet Support Pads
- Titanium Screwdriver Bits
- Tool Boxes
- Tool Chests
- Tool Container With Drawer
- Tool Control
- Toolbits
- Toolholders for Quick Change Toolposts
- Toolmaker's Vices
- Top Clamp And Pin Lock Boring Bars
- Top Clamp External Toolholders
- Torque Calibration Analyser
- Torque Limiting Screwdrivers
- Torque Multipliers
- Try And Mitre Squares
- Twin Coupling Assembly
- Twin Speed Hydraulic Hand Pumps
- Two Knurl Toolholder
- TX Sockets
- Type 5821 Horizontal And Vertical Indexing Units
- Type SOPP Horizontal And Vertical Rotary Tables
- Universal Ball Joints
- Universal Joint
- Universal Type Combination Pliers with Single Cutter
- Universal Type Heavy Duty Combination Pliers
- Vertex Couplings
- Vertical Industrial Toggle Clamp
- Waste Oil Collection
- Welding Caps
- Welding Helmets
- Wet And Dry Sheet Kit
- Wire Twisting Pliers
- Wooden Paste Table
- Wrecking And Pry Bars
- XF Series Couplings
- XP-45C 'Face Hog' Milling Cutters
- XP-45C 'Hi Shear' Milling Cutters
- XP-90 'APT' 90Deg Shell Mills
- XP-90C '4 Square' 90Deg Shell Mills
- XP-90C 'APT' 90Deg Shell Mills
- Yankee Screwdriver Bits
- York Abrasive Blocks
- Others
- View All
- CROMWELL (N)
- 280
- 294
- 314
- 331
- 400
- 503
- 505
- 510
- 512
- 515
- 516
- 518
- 522
- 536
- 537
- 538
- 539
- 540
- 553
- 554
- 567
- 582
- 907
- ABRASIVES
- AUTO RANGE DIGITAK MULTIMETER
- CUTTING TOOLS
- DECO
- DIY POWER TOOLS
- GARDEN TOOLS
- HAND TOOLS
- JANITORIAL & HYGIENE
- JIGSAW BLADES/FIBRES ABRASIVES
- KNIVES
- LUBRICANTS & CHEMICAL PRODUCTS
- MAGNETIC TOOLS
- NON SPARK TOOL
- OFFICE SUPPLIES & PACKAGING
- PERSONAL PROTECTION
- PIPE FLARING TOOLS
- PLIERS & GRIPS
- POWER TOOLS
- PRECISION EQUIPMENT
- SAFETY GLASSES
- SPARK RESISTANT
- TOOL CONTROL SETS
- TORCHES
- TYRE INFLATORS & GAUGES
- WELDING
- WORKBENCHES & CABINET
- WORKSHOP EQUIPMENT
- View All
- Edison
- Adjustable Beam Flexible Light
- 2.5 Million Candle Power Rechargeable Lantern
- Aluminium Soft Grip Led Torches
- Assorted Cable Tie Sets
- Auto Range Digital Clamp Meter
- Batteries And Torches
- Cable Tie Sets
- Cable Ties
- Calculators
- Combi Stretch Light
- Digital Multimeter
- Led Rechargeable Spotlight
- LED Swevil Headlamp
- Led Swivel Headlamp
- Pocket Torches
- Rechargeable Lamp
- Security Products
- Super Bright Led Rechargeable Spotlight
- Utility Handy Led Lantern
- Others
- View All
- Indexa
- Cam Type Toggle G-Clamp (Pull Back Clamp)
- Die Springs
- Drill Press Vice
- Drill Press Vices - Quick Grip
- Flanged Washers
- Heavy Duty Weldable Toggle Clamps
- Industrial Lathe Carriers
- Latch Plates
- Lathe Chuck Jaws
- Lathe Chuck Keys
- Modular Coolant Hose
- Modular Precision Machine Vices
- Neoprene Capped Spindles
- Neoprene Caps
- Precision Toolmaker's Vices
- Quick Action Assembly Pliers
- Quick Change Toolposts
- Quick Set Machine Shields
- Self-Centring Geared Scroll Lathe Chucks
- Swivel Foot Spindles
- Toggle Pliers
- Toolholders for Quick Change Toolposts
- Toolmaker's Vices - Plain Jaw
- View All
- Jonnesway
- Automotive Repair Tools
- Carbide Micrograin Plain Shank Slot Drills
- Electronic Tools
- Engine Service Tools
- Grip Wrenches
- Hexagon T-Handle Wrenches
- Professional Air Sender
- Professional Combination Wrench
- Professional Hammer, Chisel, Hand Riveter And Measuring Tools
- Professional Pliers And Cutters
- Professional Pneumatic Tool
- Professional ScrewDriver And Hex Key
- Professional Socket Series
- Professional Spray Gun And Accessories
- Professional Tool Trolley And Mechanic Tools Set
- Professional Torque Wrench And Ratchet Handle
- Others
- View All
- Kennedy
- Industrial Maintenance Brushes
- LED Inspection Lamps
- Mop Handles
- Suds Brush
- 1/2 Sheet Hand Sanding Pad
- 1/4 Sheet Hand Sanding Pad
- 1/4;quot; NPT/BSP Convectors
- 110V Open Drum Cable Reels
- 2 Drawer Workbench
- 21 Pcs Decorators Wallpapering Kit
- 3 Pin Plug Adaptors
- 3 Pin Plug For Indoor Use
- 3D Axis Gauging
- 4 Way Switched Multi Socket
- 5-Way Stripping And Crimping Kit
- 500kg Engine Support Beam
- 64 Pcs Professional Decorating Kit
- 8 Way Ultraslim Trailing Multi Socket
- Abrasive Files
- Absolute Calipers with SPC Output
- Absolute Digital Electronic Calipers
- Adjustable Locking Roofbars
- Adjustable Steel Squares
- Air Actuated Spool Valve
- Air Filter Regulator Combi
- Air Filter Regulator Lubricator
- Air Filter Units
- Air Lubricator Units
- Air Regulator Units
- Air Tool Chisels with 0.401" Shank
- Air Tool Chisels with 0.401;quot; Shank
- Aluminium Jaw with a Fibre Face
- Aluminium Jaw with a Rubber Face
- Aluminium Oxide Cloth
- Aluminium-Bronze Spark-Resistant Safety Tool Combination Spanners
- Arbors
- Artist Brush
- Assorted Heat Shrink Tubing
- Assorted Mounted Point Sets
- Auto Locking Tape Measure
- Autoload And Lock Knives
- Ball Joint Separator
- Ball Pein Hammers
- Bannister Hand Brushes
- Battery Booster Cables
- Bearing Separators
- Bench Stones
- Bossing Mallets
- Bottle Jacks
- Box Section Levels
- Brazed Tip Cranked Turning And Facing Tools
- Brazed Tip Turning And Boring Tools
- Broom Heads
- Buffing And Polishing Foams
- Builbers Buckets
- Butane Soldering Iron Tips
- Butt-Welded Tools
- Cable Stripper And Ripper
- Cable Strippers
- Cantilever Clamps
- Carbide Burrs
- Carbide Centre Drill
- Carbide Micrograin Plain Shank Milling Cutters
- Carbide Micrograin Plain Shank Slot Drills
- Carbide Micrograin Plain Shank Slot Drills Ball Nosed
- Carbide Stub Length Drills
- Carbide Tipped Holesaw
- Carbon Steel Non-Sterile Blades
- Carpenter Claw Hammers
- Cellulose Sponge
- Chuck Adaptors
- Chuck Keys
- Chuck Style Tap Wrenches
- Chuck Style Tape Wrenches
- Cleaning Products
- Club Hammers
- Coils for Solenoid Valves
- Cold Chisels
- Combi Shave Hook
- Combination Set
- Comfort Grip Scraper (Scale Tang)
- Connector for Valve Coils
- Construction Boat Level
- Contour Gauge
- Countersink Set 90o
- Crimp Tool Kit
- Cross Pein Hammers
- Curved Tooth File Set
- Curved Tooth Files
- Cylinder Hone
- Cylinder Hone Set
- Decorator Scrapers
- Delta Sheet Pack
- Depressed Centre And Flat Reinforced Cutting And Grinding Discs
- Dial Calipers
- Diamond Needle File Sets
- Diamond Point Wheel Dressing Tools
- Die Stocks
- Diesel Injection Pump Puller
- Digital Electronic External Micrometer
- Dispensing Bottles
- Drill Gauges
- Driver Style TX Keys
- Drum Taps
- Dual Diameter Diestocks
- Easy Read Anti-Magnetic Dial Test Indicators
- Easy Read Dial Gauges Plunger Type
- Economy Emery Cloth
- Edge And Centre Finders
- Enamelled Frame External Micrometers
- Engineer's Hand Tools
- Engineer's Scrapers
- Engineer's Square
- Engineer's Double Cut File Set
- Engineer's Hand File
- Engineer's Second Cut File Sets
- European Plug Adaptor
- Extra Heavy Duty G-Clamps
- Extra Heavy Duty G-Clamps - Copper Plate Screw
- Extra Keyless Drill Chuck
- Extra-RV Drill Chuck
- Eye And Face Protection
- Eye Loupe
- Eye Loupes
- Feeler Gauges
- Feeler Stock Coil
- Feeler Stock Strip
- Ferrule Crimp Tool
- Fibre Discs
- Fibre Grips
- Filling Knives (Scale Tang)
- Fine Adjustment Vernier Calipers
- Firm Joint Calipers
- Fitch Brushes
- Flat End Decarbonising Brushes
- Flexible Back Bi-metal Hacksaw Blades
- Flexible Backing Pads
- Flexible Backing Pads for Self-Stick Sanding Discs
- Flexible Backing Pads for Velcro Sanding Discs
- Flexible Pick Up Tools
- Folding Windscreen Stand
- French Chalk
- French Chalk Dusting Powder
- Gas Welding & Cutting
- General Purpose Scissors
- Girder Section Levels
- Glass Run Channel Cleaner
- Hammer Shafts
- Hammer Wedges
- Hand And Skin Care
- Hand Magnifiers
- Hand Wire Brushes
- Hardness Testing File Set
- Heat Shrink Tubing Set
- Heavy Duty Cylinder Hone
- Heavy Duty Deep Throat Clamps
- Heavy Duty Industrial Keyed Drill Chuck
- Heavy Duty Pry Bars
- Heavy Duty Ratchet Crimping Tool Kit
- Heavy Duty Revolving Centres
- Heavy Duty T-Handle Clamps
- Heavy Duty T-Handle Multi-Hold Clamps
- Heavy Duty Trigger Hand Sprayers
- Heavy Duty Trolley Jacks
- Heavy-Duty 50T Bottle Jack
- Heavy-Duty Liquid Measures
- Heavy-Duty Plastic Funnels
- Hexagon Ball Driver Sets
- Hexagon Ball Drivers
- HHS-E (5% Co) Countersinks Single Hole
- High Performance Router Cutter Sets
- Hollow Punhces
- Home Improver Workbench And Vice
- Hook And Loop Sanding Discs
- Horizontal Rear Hinge
- Hose Clip Flex-Driver
- HSS (5% Co) Countersink Set 90 o
- HSS (5% Co) Countersinks
- HSS All Hard Hacksaw Blades
- HSS All Hard Power Saw Blades
- HSS-Co. 8% Straight Shank Heavy Duty Drills
- Huntington Type Wheel Dressers
- Hydraulic Bench Presses
- Hydraulic Body Repair Kits
- Hydraulic Push Rams
- Identity Discs
- Industrial Diamond Coated Needle Files
- Industrial Drill Chuck Arbors
- Industrial Key Steel
- Industrial Maintenance Brush Set
- Industrial Paint Brushes
- Industrial PVC Airline Hose
- Industrial Quality Screw Extractors
- Industrial Saw Blades
- Industrial Scissors
- Industrial Solid Centres
- Industrial Terminals
- Industrial Wire Wheel Sets
- Insulated Adjustable Wrenches
- Insulated Cable Knives
- Insulated Hexagon Sockets
- Insulated Single End Ring Spanners
- Insulated Spanner
- Insulated Tools And Accessories
- Insulated Tweezers
- Interchangeable Points
- ISO Magnetic Cylinders
- Jigsaw Blades
- Jigsaw Blades 'Contractor Packs'
- Jumbo Sponge
- Knife Blade
- Knife Stone
- L-Wrench TX Keys
- L-Wrench TXS (Temper Proof) Keys
- Lead Lamp Wire Cage
- Led Inspection Lamps
- Led Inspection Lamps With Swivel Clamp
- Lever Operated Vacuums
- Linisher Belts
- Liquid Measures
- Long Tape Measures - Steel Blade
- M2 Multi-Tooth Milling Cutter Set
- M2 Multi-Tooth Milling Cutters
- Machinists Hammer
- Magnetic Cable Guider
- Magnetic Drilling Machines
- Magnetic Post Levels
- Magnetic Sensor with LED
- Magnetic Stand Fitments
- Magnetic Tack Hammers
- Magnetic Vice Jaws
- Mains Testers
- Manually Operated Spool Valves
- Markers - Line and Paint
- Mechanical Lifting Equipment
- Mechanical Lifting Equipment/Slings
- Mechanical Puller - 2 Jaw
- Mechanical Puller - Industrial Kits
- Mechanical Puller Sets
- Mechanical Pullers
- Mechanically Actuated Spool Valves
- Medium Duty G-Clamps
- Milled Tooth Hand Files
- Mini ISO Magnetic Cylinders
- Mini Roller Refills
- Mini-Pod Floodlight
- Mondeo Sub-Frame Bush Installation And Removal Tool
- Morse Taper Adaptors
- Morse Taper Tooling
- Moulded Plastic File Handles
- Mounted Points And Wheels
- Multi Flute - Straight Shank
- Multi-Purpose Crimping Plier Kit
- Nail Brushes
- Non-Sterile Handle Knives
- Nylon Faced Hammer
- Nylon Faced Safe Blow Hammer
- O-Clip Pincers
- Offset Hacksaw Frame
- Oil Filter Pliers
- One Handed, Quick Action Bar Clamps
- Packaging
- Paint And Plaster Mixer
- Paint Kettles
- Paint Tray
- Pilot Pins
- Pin Punches
- Pin Vices
- Piston Ring Compressors
- Piston Rod Clevis Mountings
- Piston Rod Eye Mountings
- Plasterer's Bath
- Plastic And Galvanised Dustbins
- Plastic Funnel Set
- Plastic Funnels
- Plastic Handle Pry Bars
- Plastic Jerry Cans
- Plastic Oil Cans
- Plumb Bobs
- Pneumatic Fitting Kit
- Pneumatic Fittings
- Pocket Stone
- Pocket Type Dial Thickness Gauges
- Pointed End Decarbonising Brushes
- Portable Bench And Vice
- Portable Bench Top Workstation
- Portable Sander Belts
- Portable Task Light
- Pouring Spouts
- Power Tool Chisels
- Precision Blades
- Precision Knives
- Precision Needle Files Needle Pattern (Round Handle)
- Pressed Steel G-Clamps
- Pressure Gauges
- Pro-Torq TX Clip Wrench Set on Clip
- Professional Box Section Level
- Professional Combination Spanners
- Professional Desoldering Tool
- Professional Paint Brushes
- Professional Reinforced Moulded Plastic Extra Wide Creeper Board
- Professional Reversible Combination Spanners
- Protector Sleeves
- Pure Yarn Socket Mop Heads
- Push-Fit Pneumatic Fittings
- Putty Knives
- Radiator Paint Brushes
- Radio Release Master Set
- Radius Gauges
- Rasp Cut files
- Ratchet Type Tap Wrenches
- Ratcheting Axle Stands
- RCD Sockets And Plugs
- Reamer Stone
- Rear Clevis - Male
- Rear Clevis And Pin - Female
- Reduced Shank Wad Punches
- Replacement Hard Nylon Hammer Faces
- Replacement Parts
- Retractable Carbide Tipped Etching Pen
- Road Measuring Wheel with Carry Case
- Rotary Mansory Drill Bit Sets
- Rotary Masonry Drill Bits
- Router Cutters
- Rubber Mallets
- SafeBlower Hammer
- Safety Wooden File Handles
- Sanding Sheets
- Sash Clamps
- Scissor Jack
- Scrapers (Scale Tang)
- Screw Pitch Gauges
- Screw Plug Gauges
- Scribers
- Scroll Jaws
- Scrubbing Brush
- Scutch Hammers
- Scythe Stones
- SDS Adaptor
- SDS Max Chisels
- SDS-Style Fitting Drill Bit Sets
- SDS-Style Fitting Hammer Drill Bits
- Seal Repair Kit
- Second Cut File Set
- Self-Stick Backing Pads
- Serrated Soft Jaws
- Service Kits
- Setting-in Sticks
- Sharpening Stone Set
- Sheepskin Bonnets
- Short And Long Handle Wall Scrapers
- Shrinking Hammer
- Silversmith Stone
- Single Speed Hydraulic Hand Pumps
- Site Plug And Sockets
- Sledge Hammers
- Slip Stones
- Smile Dial Gauges Plunger Type
- Snap Bottom Oil Can
- Snap-Off Knife Blades
- Soldering Iron
- Solenoid Valves
- Solid Carbide High Performance Premium Countersinks
- Solid Carbide Jobber Drills
- Solid Carbide Micrograin Plain Shank Slot DrillscDouble Ended
- Solid Carbide Screw Drills
- Spanner
- Spare Bulb - Halogen
- Spare Jaws for Mechanical Puller
- Spare Shoes for G-Clamps
- Spare Tips For T-Handle Circlip Tool
- Special Purpose Scissors
- Spiro-Rapid Clamping Keyless Drill Chuck
- Spring Action Gripper Clamps
- Spring Compressor Sets
- Stale Holder
- Standard Duty Industrial Keyed Drill Chuck
- Standard Duty Revolving Centres
- Standard Wire Gauge
- Standard Wooden File Handles
- Steel Bench Vices
- Steel Gauge Block Sets
- Straight Head Valve Seal Ring Pliers
- Surge And Spike Protected Multi Socket Extensions
- Surveyors Tape Measures
- Syphon Pump
- T-Handle Clamps
- Tap Wrenches
- Taper Punches
- Tapered Gauges
- Telescopic Gauges
- Telescopic Shaft Inspection Mirrors
- Terminals - Rings / Forks
- Terminals - Spades / Bullets / Butt Connectors
- Tin Plate Measures For Oil
- Tin Plated Industrial Quality Funnels
- Tin Plated Oil Supply Cans
- Toolbits
- Toolmakers Clamps
- Trolley Jack
- Trolley Jack Spares
- Tweezers
- TX Key Ring Set
- Ultraslim Multi Socket Extension
- Uninsulated Terminal Crimp Tool
- Universal Caliper Wind-Back Tool Kits
- Valve And Piston Ring Compressor
- Variable Pitch Bi-metal HSS Holesaw
- Variable Pitch Bi-metal HSS Holesaw Kits
- Velcro-Backed Delta Sheets
- Vertical Rare Hinge
- Viscous Hub Spanners
- Wall Socket and Extension Tester
- Welding
- Welding Accessories
- Welding Caps
- Welding Gloves
- Welding Helmets
- Wet Or Dry Silicon Carbide Paper
- Window Scraper
- Windscreen Moulding Release Tool
- Wire Wheel
- Wooden Handle Speed Clamps
- Work Light
- Wrecking And Pry Bars
- Writing Instruments
- Others
- View All
- Kobe
- 10mm Reversible Angle Drill
- 10mm Reversible Pistol Grip Drill
- 110V Open Drum Cable Reels
- 115 And 125mm Angle Grinder
- 115mm Angle Grinder
- 12V Cordless Drill/Driver
- 13mm Impact Drill
- 14.4V Cordless Impact Drill
- 150mm/6;quot; Bench Grinder
- 18V Cordless Impact Drill
- 22mm SDS-Plus Impact Drill
- Air And Water Hose Reels
- Air Hammer Chucks
- Air Riveter
- Air Spray Guns
- Angle Grinder
- Bench-Pillar Drills
- Blow Gun
- Catering Appliances
- Chuck Keys
- Cordless Impact Driver
- Coupling Adaptors
- Desoutter Style Drill Collets
- Diamond Core Drills
- Drill Chuck
- Extended Spindle Die Grinder
- Fan and Heaters
- Flexible Backing Pads for Velcro Sanding Discs
- Floor Standing Pillar Drill
- Genuine Schrader Couplings
- Heavy Duty Riveter
- Heavy-Duty Needle Scaler
- Heavy-Duty Nylon Air Hose
- Hook'n'Loop Backed Sanding Discs
- Industrial PVC Airline Hose
- Male Threaded Tailpieces
- Micro Die Grinder
- Mini Belt Sanders
- Mini Belt Sanders (File Sanders)
- Mini Random Orbital Sander Kit
- Multi Purpose Tool Kit
- Multi-Purpose Body Saw
- Needle Scaler Attachment
- Oil-Free Compressors
- Orbital Palm Sander
- Portable Petrol Generator
- Professional Heat Gun Kit with LCD Display
- Punches And Dies for Nibblers
- Rapid Cutting Metal Shear
- Retainers
- Scaler Needles
- Shatter Resistant Body Saw Blades
- Shear Head
- Speed Ratchet
- Standard Couplings
- Tile And Glass Drill Set
- Tile And Masonry Drill Sets
- Twin Socket Cable Reel
- Twin Socket Drum Cable Reel
- Variable Speed Cordless Impact Driver
- Variable Speed Cordless Impact Wrech
- Vertex Couplings
- XF Series Couplings
- View All
- Lincoln
- Matlock
- Architectural Hardware
- Bench Assembly Units
- Free Standing Racks
- Gas Welding & Cutting
- Heavy Duty Racking
- Mechanical Lifting Equipment/Slings
- Mobile Trolleys / Racks
- Padlock
- Padlocks
- Parts, Component And Tool Storage Bins
- Plastic Storage Bins
- Security Products
- Standard Duty Racking
- Steel Louvred Panels
- Storage Bin Accessories
- View All
- Nitti
- Offis
- Orion
- Osaki Power Tools
- 115mm (4 1/2;quot;) 900W Mini Grinder
- 13mm (1/2;quot;) Impact Drill
- 150mm/6;quot; Bench Grinder - 250W
- 2 Stroke Petrol Generator
- 250mm Sliding Compound Mitre Saw with Laser Guidance
- 3.6V Cordless Screwdriver Set
- 5-Speed Bench Drill
- 82mm Wood Planer - 910W
- Accessory Kit
- Circular Saw with Laser Guidance
- Cold Water Pressure Washer
- Cols Water Pressure Washer
- Electric Engrave Kit
- Mini Metalworking Lathe
- Reciprocating Saw 600W / 240V
- View All
- Oxford
- 0 - 150mm/0 - 6;quot; Digital Depth Gauge
- 3 Point Bore Micrometer Sets
- Angle Plates
- Anvils, Indentors And Test Blocks
- Bench Magnifiers
- Biological Compound Microscope
- Chrome Tally Counters
- Depth Gauge Attachment
- Dial Calipers
- Dial Indicating Bore Gauges
- Dial Thickness Gauge
- Digital Electronic External Micrometer
- Dissecting Stereo Metallurgical Microscope
- Dual Counter Height Gauges
- Easy Read Dial Gauges Plunger Type
- Easy Read Dial Test Indicators
- Enamelled Frame External Micrometers
- Engineer's Squares
- External Micrometer Sets
- Fine Adjustment Vernier Calipers
- Hand Magnifiers
- Heavy Duty Vernier Calipers
- IDM Digital Indicator
- IDS Digital Indicator
- Illuminated Bench Magnifier - Adjustable Arm Type
- Interchangeable Anvil Micrometer
- Leg Type Dial Calipers
- Magnifying Loupes
- Micrometer Setting Standards
- Mini-Mag Stand
- Oxford Precision Granite Products
- Plain Surface Plates
- Portable Optical Refractometer
- Precision ABS Digital Calipers
- Scales
- Standard Vernier Calipers
- Steel Parallels
- Vee Blocks
- Vernier Bevel Protactor
- Others
- View All
- Packaging Tape OJI
- Rutland
- 3 Way Male Snap Action Connector
- Anvil And Bypass Loppers
- Blue Rubble Sacks-On a Roll
- Bow Saws
- Bypass Secateurs
- Cable Laying, Draining And Grafting Tools
- Carbon Steel Fork And Trowel
- Carbon Steel Gardening Tools
- Coil Hose Sets
- Compact Style Binoculars
- Galvanised Chicken Wire
- Galvanised Watering Cans
- Garden Hoses
- Garden Knapsack Sprayer
- Head Protection
- Heavy Duty Hedge Shears
- Hose Trolley
- Pick Axe Head
- Pop-up Garden Waste Bag
- Pop-Up Gazebo Shalter
- Pruning Shears
- Rotating Sprinkler
- Rustless Garden Saw
- Snow Shovel
- Square Mouth Shovels
- Stainless Steel Fork And Trowel
- Stainless Steel Gardening Tools
- Taper Mouth Shovel, Fork And Round Shovel
- Trigger Hand Sprayer
- Ultra Compact Binoculars
- Weed Control Matting
- View All
- Sandvik
- Senator
- 11 Blade Pocket Knife
- 170 Piece Drill Set
- 5 Drawer Cabinet And Shelved Workbench
- 5 Drawer Cabinet And Workbench
- 6 Blade Pocket Knife
- Adhesive Spreader
- Adjustable Hacksaw
- Aluminium Oxide Cloth
- Assorted Emery Strips
- Bird Cage Paint Roller
- Cabinet with Self And Workbench
- Carpenter's Rules
- Chrome Finish Adjustable Wrenches
- Chromed Drop Forged Adjustable Wrenches
- Diamond Coated Burr Set
- Diamond Dressers
- Diamond Riffler Files
- Drill Press Vice
- Economy Digital Calipers
- Economy Refill Sleeves
- Engineer's File Sets
- Engineer's Second Cut File Sets
- Engineer's Vice
- Engineering Ball Pein Hammers
- Fibre Disc Kit
- Flap Wheel Sets
- Glass Paper
- High Speed Steel Roll Forged Jobber Drills
- Lead Lamp Plastic Case
- Light Duty Cast G-Clamps
- Lightweight Sash Clamps
- Locking Cabinet with Shelf And Workbench
- Locking Knife
- Locking Tape Measures
- Long Tape Measures - Hi-Visibility Case
- Needle File Sets
- Paint Brushes
- Paint Pad Set
- Plastic Dial Caliper - Metric
- Plastic Storage Bins
- President Decorators Tools
- Pull/Push Tape Measure
- Putty Knives
- Replacement Jaws (Pairs)
- Router Cutters
- Spares For 4-in-1 Torch Kit
- Tile Cutter
- Tile Cutting Pliers
- Workshop Vice
- View All
- Sherwood
- 2 Pcs BS Set
- 3 Flute Piloted Countersinks
- 5 Pcs Metric Set
- BA (British Association) HSS Ground Thread Dies
- BA (British Association) HSS Ground Thread Taps
- BSF (British Standard Fine) HSS Ground Thread Dies
- BSF (British Standard Fine) HSS Ground Thread Taps
- BSF Threading Set
- BSPF (British Standard Pipe Fine) HSS Ground Thread Dies
- BSPF (British Standard Pipe Fine) HSS Ground Thread Taps
- BSPT (British Standard Pipe Taper) HSS Ground Thread Die Nuts
- BSPT (British Standard Pipe Taper) HSS Ground Thread Dies
- BSPT (British Standard Pipe Taper) HSS Ground Thread Taps
- BSW (British Standard Whitworth) HSS Ground Thread Die Nuts
- BSW (British Standard Whitworth) HSS Ground Thread Dies
- BSW (British Standard Whitworth) HSS Ground Thread Top Sets
- BSW Threading Set
- Carbide Centre Drill
- Carbide Micrograin Plain Shank Milling Cutters
- Carbide Micrograin Plain Shank Slot Drills 2 Flute Ball Nosed
- Carbide Plain Shank Corner Radius End Mills 4 Flute
- Carbide Plain Shank End Mills High Helix
- Carbide Plain Shank Slot Drills 2 Flute
- Carbide Printed Circuit Board Drills
- Carbide Spotting Drills
- Cobalt Straight Shank Chucking Reamers
- Countersink Set
- HHS-E (5% Co) Countersinks Single Hole
- High Speed Steel Centre Drills
- High Speed Steel Drill Blanks
- High Speed Steel Extra Length Centre Drills
- High Speed Steel Extra Length Taper Shank Drills - Inch
- High Speed Steel Extra Length Taper Shank Drills - Metric
- High Speed Steel General Purpose Stub Drill
- High Speed Steel General Purpose Stub Drill - Bright Finish
- High Speed Steel SCD Drills
- HSS (5% Co) 3 Flute Straight Sank
- HSS (5% Co) 3 Flute Taper Shank
- HSS (5% Co) Countersink Set 100o
- HSS (5% Co) Countersink Set 60o
- HSS (5% Co) Countersinks
- HSS (5% Co) High Performance Countersinks
- HSS (5% Co) Tin Coated Countersink Set - 90o
- HSS 90o Countersinks
- HSS Bell Type Centre Drills
- HSS Extra Length Drill Set
- HSS Extra Length Drills - Steam Tempered
- HSS Ground Flute Jobber Drill Sets
- HSS Ground Flute Select-A-Drill Set
- HSS Ground Flute Tap And Drill Sets
- HSS Jobber Drill Set - Bright Finish
- HSS Jobber Drills - Metric Steam Tempered
- HSS Jobber Drills Metric - Bright Finish
- HSS Long Series Drill Set
- HSS Multi Diameter Step Drill
- HSS Plain Shank Corner Rounding Cutters
- HSS Plain Shank Dovetail Cutters (Single Angle Cutters)
- HSS Plain Shank T-Slot Cutters
- HSS Plain Shank Woodruff Cutters
- HSS Reduced Shank Drill Set (Blacksmiths)
- HSS Reduced Shank Drills (Blacksmiths)
- HSS Sheet Metal Step Drill Set
- HSS Small Diameter Slitting Saws
- HSS Straight Shank Long Series Drills
- HSS Straight Shank Long Series Drills - Bright Finish
- HSS Straight Shank Long Series Drills - Steam Tempered
- HSS Straight Shank Quick Spiral, Extra Length Vent Drills
- HSS Taper Shank Drills - Metric
- HSS Taper Sheet And Tube Drills
- HSS Threaded Shank 2 Flute End Mills (Slot Drills)
- HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills)
- HSS Threaded Shank Corner Rounding Cutters
- HSS Threaded Shank Dovetail Cutters (Single Angle Cutters)
- HSS Threaded Shank End Mills 4 And 6 Flute
- HSS Threaded Shank End Mills Multi Flute
- HSS Threaded Shank Slot Drills 2 Flute
- HSS Threaded Shank T-Slot Cutters
- HSS Threaded Shank Woodruff Cutters
- HSS-Co. 5% Taper Shank Drills
- HSS-Co. 5% Threaded Shank Slot Drills 2 Flute
- HSS-Co. 5% Threaded Shank Slot Drills 3 Flute
- HSS-Co. 8% Plain Shank Milling Cutter 4 Flute
- HSS-Co. Cobalt Long Series Milling Cutters 2 Flute
- HSS-Co. Plain Shank Milling Cutter 4 Flute
- HSS-Co. Plain Shank Milling Cutters 2 Flute
- HSS-Co. Straight Heavy Duty Drills
- HSS-E Weldon Shank Coarse Pitch Ripper Cutters
- HSS-EV Threaded Shank Fine Pitch Ripper Cutters
- HSS-EV Weldon Shank Fine Pitch Ripper Cutters
- Metric Coarse HSS Ground Thread Dies
- Metric Coarse HSS Ground Thread Taps
- Metric Coarse Left Hand Straight Flute Ground Thread Taps
- Metric Fine HSS Ground Thread Dies
- Metric Fine HSS Ground Thread Taps
- Metric HSS Ground Thread Left Hand Dies
- Metric Threading Set
- Multi Flute - Straight Shank
- NPSF (National Pipe Standard Fuel) HSS Ground Thread Taps
- NPT (National Pipe Taper) HSS Ground Thread Die Nuts
- NPT (National Pipe Taper) HSS Ground Thread Dies
- NPT (National Pipe Taper) HSS Ground Thread Taps
- NPTF (National Pipe Taper Fuel) HSS Ground Thread Taps
- Solid Carbide Jobber Drills
- Solid Carbide Micrograin Plain Shank End Mills 4 Flute Ball Nosed
- Solid Carbide Stub Drills
- Solid Counterbores HSS-Co 5%
- Spotting Drills
- Straight Shank Hand Taper Pin Reamers
- Straight Shank Machine Reamers
- Straight Shank Parallel Hand Reamers
- Taper Shank Extra Length Machine Reamers
- Taper Shank Machine Remaers
- Thread Restoring Files
- UNC (Unified Coarse HSS Ground Thread Die Nuts
- UNC (Unified Coarse) HSS Ground Thread Dies
- UNC (Unified Coarse) HSS Ground Thread Tap Sets
- UNC Threading Set
- UNF (Unified Fine) HSS Ground Thread Die Nuts
- UNF (Unified Fine) HSS Ground Thread Dies
- UNF Threading Set
- View All
- Sitesafe
- Solent Cleaning And Hygiene
- Solent Hygiene
- Solent Lubricants
- Solent Maintenance
- Solent Paint Marker
- Solent Spill Control
- Swiss Tech
- B And C Standard Duty Deburring And Scraping Set
- B4 Hand Deburring Set
- C3 Hand Scraper Set
- Carbide Plain Shank Corner Radius End Mills 4 Flute
- Carbide Plain Shank Corner Radius Slot Drills 2 Flute
- Carbide Plain Shank End Mills 4 Flute
- Carbide Plain Shank End Mills 4 Flute Ball Nosed
- Carbide Plain Shank End Mills Ball Nosed 4 Flute
- Carbide Plain Shank End Mills High Helix
- Carbide Plain Shank Milling Cutters
- Carbide Plain Shank Ripper Fine Pitch
- Carbide Plain Shank Slot Drills 2 Flute
- Carbide Plain Shank Slot Drills 2 Flute Ball Nose
- Carbide Plain Shank Slot Drills 2 Flute Ball Nosed
- Carbide Plain Shank Slot Drills Ball Nosed 2 Flute
- D3 Hand Deburring Set
- DB3 Double Burr Hand Deburring Set
- Diamond Coated Filing And Deburring Set
- E And C Heavy Duty Deburring And Scraping Set
- E5 Heavy Duty Hand Deburring Set
- E7 Heavy Duty Hand Deburring Set
- F3 Hand Chamfering And Countersinking set
- High Speed Steel TiN Coated Stub Drills Metric
- HSS 'Blue Ring' Taps
- HSS 'Green Ring' Fluteless Taps
- HSS 'Green Ring' Taps
- HSS 'Orange Ring' Taps
- HSS 'Purple Ring' Taps
- HSS 'Red Ring' Taps
- HSS 'White Ring' Taps
- HSS 'Yellow Ring' Taps
- HSS Straight Shank TiN Tipped Jobber Drills
- HSS TiN Coated Jobber Drills
- HSS-Co. 8% Threaded Shank Ball Nosed Slot Drills 2 Flute
- HSS-Co. 8% Threaded Shank End Mills 4 And 6 Flute
- HSS-Co. 8% Threaded Shank Slot Drills 2 Flute
- HSS-Co. 8% Threaded Shank Slot Drills 3 Flute
- HSS-Co. 8% Weldon Long Shank Coarse Pitch Roughing End Mills
- HSS-Co. 8% Weldon Shank 42Deg High Felix Slot Drills 2 Flute For Aluminium
- HSS-Co. 8% Weldon Shank 50Deg High Helix End Mills 3 Flute
- HSS-Co. 8% Weldon Shank Ball Nose Slot Drills 2 Flute
- HSS-Co. 8% Weldon Shank Coarse Pitch 37Deg High Helix for Aluminium Roughing End Mills 3 Flute
- HSS-Co. 8% Weldon Shank Coarse Pitch Ripper Cutters
- HSS-Co. 8% Weldon Shank End Mills 4 And 6 Flute
- HSS-Co. 8% Weldon Shank Fine Pitch Ripper Cutters
- HSS-Co. 8% Weldon Shank Slot Drills 2 Flute
- HSS-Co. 8% Weldon Shank Slot Drills 3 Flute
- HSS-Co. Heavy Duty Cobalt Stub Drills
- HSS-Co. Straight Heavy Duty Drills
- HSS-Co. Straight Shank Heavy Duty TiN Coated Drills
- HSS-Co. Straight Shank High Helix Drills
- HSS-Co. Straight Shank Long Series Drills
- HSS-Co. Straight Shank Long Series Parabolic Drills
- HSS-Co. Straight Shank Parabolic Drills
- HSS-Co. Straight Shank TiN Coated High Helix Drills
- HSS-Co. Straight Shank TiN Coated Long Series Parabolic Drills
- HSS-Co. Straight Shank TiN Coated Parabolic Drills
- HSS-Co. TiN Coated Heavy Duty Stub Drills
- HSS-E 'Black Ring' Taps
- HSS-E PM 2 Flute Ball Nose Slot Drill Peak Power Set
- HSS-E PM 3 Flute End Mill Peak Power Set
- HSS-E PM 4 Flute End Mill Peak Power Set
- HSS-E PM Coated 4 Flute End Mills
- HSS-E PM Coated Fine Pitch Ripper
- HSS-E PM Fine Pitch Ripper Peak Power Set
- KB3 Keyway Burr Hand Deburring Set
- Mini Burr Set
- Modular Deburring Tools
- Pocket Knife
- Solid Carbide Q-Coat Drill
- Weldon Shank HSS-E PM TiALN Coated 45Deg High Helix Milling Cutters
- Weldon Shank HSS-E PM TiALN Coated Fine Pitch Ripper Cutters
- Weldon Shank HSS-E PM TiALN Coated High Helix Cutters
- View All
- Thor Hammer
- ThreeBond
- Tuffsafe
- Wiriti Lighting
- Yamaloy
- Yamoto
- York Abbrasives
- 115mm Rust And Paint Removal Disc
- Adhesive Backed Discs
- Carbide Burr Sets
- Carbide Burrs
- Cartridge Roll Kit
- Cartridge Rolls
- Clean And Strip Discs Kit
- Clean And Strip Unitised Discs
- Clean And Strip Unitised Wheels
- Depressed Centre Cutting And Grinding Discs
- Diamond Coated Burr Set
- Diamond Coated Burrs
- Drum Holders
- Felt Bob Set
- Fibre Discs
- Fibre Hand Pads
- File Belts
- Flap Wheel Sets
- Flap Wheels
- Flet Bobs
- Flexible Abrasive
- Grinding Wheel
- High Performance Flap Discs
- Hook And Loop Backed Sanding
- Linisher Belts
- Mandrels
- Non-Woven Roll
- Open Type Polishing Mops
- Polishing Mop Kits
- Pre-Finish And Polishing Bars
- Sanding Band Kits
- Sanding Bands
- Sanding Sticks And Belts
- Screw Fitting Disc Holders
- Shaft Mounted Combi Wheels
- Speedway Burr Set
- Stitched Type Polishing Mops
- Surface Conditioning Discs
- Surface Preparation
- Surface Preparation And Polishing Kit
- XL Unitised Discs
- XL Unitised Wheels
- York Silicon Carbide Valve Grinding Compound
- View All
- Sample Kennedy
- Others
Brilliance Trading Sdn Bhd
5, Jalan Kekabu 11,
Taman Desa Cemerlang,
81800 Johor, Malaysia.
5, Jalan Kekabu 11,
Taman Desa Cemerlang,
81800 Johor, Malaysia.
+607-8637851
KEN0501850K
| Previous | 3 / 6 | Next |
K10 32-210mm HOLESAW ARBOR
Kennedy Holesaws
Kennedy holesaw arbors are manufactured from alloy steel that is precision machined and threaded, to guarantee a smooth secure fit to all Kennedy variable, constant pitch or carbide tipped holesaws* and are designed to ensure that you can quickly change the hole saw or HSS pilot drill.
Available with hexagon, round and SDS-plus shanks suitable for use with all power tools and are also compatible with all other popular threaded bore hole saws.
For the full range of Kennedy holesaws and arbors please refer to our catalogue.
*When used with the correct size of holesaw.
K10 32-152mm Holesaw Arbor
Kennedy holesaw arbors are manufactured from alloy steel that is precision machined and threaded, to guarantee a smooth secure fit to all Kennedy variable, constant pitch or carbide tipped holesaws* and are designed to ensure that you can quickly change the hole saw or HSS pilot drill.
Available with hexagon, round and SDS-plus shanks suitable for use with all power tools and are also compatible with all other popular threaded bore hole saws.
For the full range of Kennedy holesaws and arbors please refer to our catalogue.
*When used with the correct size of holesaw.
K10 32-152mm Holesaw Arbor
Specification:
| Property | Value |
|---|---|
| Overall Length | 35 |
| Overall Width | 35 |
| Overall Depth | 135 |
| Overall Weight | 0.225 |
| UNSPSC Code | 27112826 |
| eCl@ss Code | 21019090 |
| Brand | Kennedy Industrial |
| Product Number | K10 |
| Saw Range | 32 - 152 |
| Shank Size | 8.75mm Hex |
| Weight each | 200g |
| Supplier Part No. | K10 |